What is REDcert² and who is it for?
REDcert² has been available since 2015. It extends REDcert-EU principles to markets where RED requirements do not apply. Companies use it voluntarily, usually at customers' request or as part of their own sustainability goals.
The scheme has two main areas of use:
- food and feed — certification of sustainable agricultural feedstocks such as rapeseed, soy and cereals, and of their processed products,
- chemicals — certification of supply chains where biogenic feedstocks replace part of fossil feedstocks and the biomass share is attributed to products using mass balance.
REDcert² does not replace REDcert-EU. If a product goes to the fuel market and must count towards RED targets, you need REDcert-EU. Both schemes can, however, run within one organisation.
REDcert² in food and feed
Oilseed and grain processors make products for the fuel, food and feed markets at the same time. An oil mill sells rapeseed oil to a biodiesel producer and meal to a feed mill. Meal buyers increasingly expect proof of the sustainable origin of the feedstock.
REDcert² carries that information through feed and food supply chains. Biomass origin requirements are similar to REDcert-EU. They cover protection of valuable natural areas, good agricultural practice and batch traceability.
Typical REDcert² users in this sector include:
- grain and rapeseed collection points and traders,
- oil mills and soy crushers,
- compound feed and premix producers,
- food manufacturers using plant-based raw materials,
- retailers requiring confirmation from suppliers.
REDcert² in the chemical industry
In chemicals, biogenic feedstocks are often fed into installations together with fossil feedstocks. Physical separation of streams is impossible or uneconomic. Mass balance lets you attribute the biomass share to selected products in line with the scheme rules.
The attribution must be credible and verifiable. The company documents the quantity and type of biogenic feedstock, conversion factors and allocation rules. The auditor checks that total attributed shares do not exceed the biomass actually fed in.
REDcert² is used by producers of chemicals, plastics and packaging and by chemical distributors. For them, the certificate is evidence for customers who report the share of renewable feedstock in their own products.
REDcert² requirements step by step
REDcert² requirements fall into five areas:
| Area | What you need to show |
|---|---|
| Biomass origin | feedstock meets sustainability criteria, supported by supplier certificates or self-declarations |
| Traceability | transport documents and declarations for every delivery and sale |
| Mass balance | inputs and outputs reconciled per period, conversion factors, balance |
| Management system | procedures, responsibilities, training, document control |
| Internal control | internal audit, corrective actions, complaints handling |
The documentation is similar to REDcert-EU. Differences mainly concern declarations, attribution rules in chemicals and the absence of RED-style GHG calculation requirements. Some customers do, however, also expect carbon footprint information.
Declarations and claims
Every sale of certified material requires a document stating its REDcert² status. It must include the seller's certificate number, the quantity and the product type. Templates and completion rules are set out in the REDcert scheme documents.
Marketing claims must be precise. Under mass balance, the product does not physically contain only biomass from the certified source. Claims such as "100% biomass" without explaining the method may be considered misleading. We help prepare safe wording that complies with scheme rules and consumer protection law.
How REDcert² implementation works
- Products and customers. We define which products and sites to certify and what documents customers require.
- Gap analysis. We compare current procedures with REDcert² requirements.
- Documentation. We prepare procedures, declaration templates, registers and a mass balance workbook. Ready-made templates are in the REDcert² Documentation Package.
- Team training. We train purchasing, warehouse, production and sales.
- Internal audit. We test the system on real transactions.
- Certification audit. We support you during the certification body's audit.
If you already hold REDcert-EU, REDcert² implementation usually takes a few weeks. Shared procedures are extended to new products and declarations.
Benefits of REDcert² certification
- proof of sustainable feedstock origin for food, feed and chemical customers,
- support for customers' ESG reporting and climate goals,
- the ability to sell co-products such as meal with sustainability status,
- reuse of the record system built for REDcert-EU,
- a credible basis for communicating renewable feedstock content.
Example: an oil mill with REDcert-EU and REDcert²
An oil mill crushes 100,000 tonnes of rapeseed a year and produces around 40,000 tonnes of oil and 58,000 tonnes of meal. It sells the oil to a biodiesel producer with a REDcert-EU declaration. The meal goes to feed mills, some of which expect proof of sustainable origin.
With REDcert² the mill can sell meal with a REDcert² declaration in the quantity resulting from its mass balance. Rapeseed received as sustainable is accounted for once: part of the status goes to the oil and part to the meal, according to conversion factors. The mass balance workbook shows which quantities went to which scheme.
This model needs one traceability procedure, shared supplier qualification and two declaration templates. Audits for both schemes can usually be held on the same dates.
Documents and records required under REDcert²
- sustainable sourcing policy,
- description of certification scope and sites,
- supplier qualification procedure and certificate register,
- traceability procedure and batch register,
- mass balance procedure and workbook,
- declaration templates and register of issued declarations,
- product communication rules,
- internal audit plan and reports,
- training, complaints and corrective action records.
Common implementation challenges
Chemical companies often struggle to describe the attribution method when one installation makes many products. A flow diagram with marked measurement points helps. In feed, the challenge is separating quantities sold with and without declarations in the sales system. In both cases the key is a single data source shared by purchasing, production and sales.
The second challenge is communication. Marketing teams want simple slogans, while the scheme requires precision. A catalogue of approved wording, prepared together with the documentation, solves this.
How much does REDcert² cost?
Costs include the certification body's fee, the REDcert scheme fee and your preparation. The body's fee depends on the number of audit days, which depends on the number of sites and process complexity. If you already hold REDcert-EU, preparation costs are usually modest because much of the system is already in place. We quote consulting after an initial call.
Frequently asked questions
Is REDcert² recognised by the European Commission?
No, because REDcert² is not used to demonstrate RED compliance. It is a voluntary scheme for non-regulated markets. To count fuels towards RED targets you need REDcert-EU. Both schemes are run by the same organisation, REDcert GmbH.
Does REDcert² require GHG calculations?
The scheme does not require GHG calculations to the same extent as REDcert-EU. Many customers do, however, ask for product carbon footprint information. Data collected for the mass balance can support such calculations. We help prepare calculations tailored to customer expectations.
Can an oil mill with REDcert-EU easily obtain REDcert²?
Yes, this is a common scenario. Traceability, mass balance and supplier qualification procedures can be extended to new products. You add REDcert² declarations and include co-products in the balance. Audits for both schemes can usually be combined.
How is the biomass share attributed in chemicals?
The company determines the quantity of biogenic feedstock fed into the process and attributes a corresponding share to selected products according to scheme rules. Total attributed shares may not exceed the biomass input after conversion. The method must be documented and applied consistently. The auditor checks the calculations for a sample of periods.
Can a REDcert² product be labelled "bio"?
Be careful. Under mass balance a product may physically contain fossil feedstock. Claims must explain the attribution method and follow the scheme's communication rules. We help prepare safe wording.
How long does REDcert² certification take?
A company without prior certificates usually needs two to three months. With an existing REDcert-EU certificate a few weeks are often enough. The certificate is valid for 12 months, and a recertification audit is needed before it expires.
Sources and reference documents
- REDcert GmbH — scheme documents and certificate list
- EUR-Lex — Implementing Regulation (EU) 2022/996
This content is prepared by Quality Assurance Poland and is not a REDcert GmbH document. Always apply the current versions of REDcert scheme documents and legislation.
Enquire about this service
Briefly describe your business and certification goal, and we will propose a scope, timeline and price.