Where REDcert-EU came from
The 2009 Renewable Energy Directive introduced sustainability criteria for biofuels. Member States could only count compliant fuels towards their targets, so certification schemes covering the entire supply chain were needed to demonstrate compliance.
REDcert GmbH was founded in 2010 by German agricultural and biofuel organisations to create a scheme suited to European agriculture and processing. REDcert-EU was recognised by the European Commission and has since been used in many EU countries.
Legal basis and recognition
Today REDcert-EU operates under Directive (EU) 2018/2001 as amended by Directive (EU) 2023/2413, known as RED III. Verification rules, including requirements for voluntary schemes and certification bodies, are set out in Implementing Regulation (EU) 2022/996.
The European Commission recognised REDcert-EU by Implementing Decision (EU) 2024/3194 of 19 December 2024. The decision runs until 21 December 2029 and replaced Decision (EU) 2022/605. The recognition covers:
- biofuels, bioliquids and biomass fuels,
- renewable fuels of non-biological origin (RFNBOs),
- recycled carbon fuels (RCFs),
- the entire chain of custody, using mass balance in line with Article 30 of the RED.
Recognition means that Member States accept REDcert-EU certificates as evidence that the criteria are met. A Member State cannot refuse evidence from a recognised scheme, although it may carry out its own checks.
How the scheme works
REDcert GmbH owns the scheme. It writes the scheme documents, trains auditors and approves certification bodies. Bodies carry out audits and issue certificates, and certified companies apply the requirements in practice.
| Participant | Role |
|---|---|
| European Commission | recognises the scheme and oversees its compliance with the directive |
| REDcert GmbH | runs the scheme, publishes documents and the certificate list |
| Certification body | carries out audits and issues certificates |
| Certified operator | meets requirements and issues sustainability declarations |
| Farmer or point of origin of waste | signs self-declarations, subject to sample checks |
Certificates are valid for 12 months. Valid, suspended and withdrawn certificates are listed on the REDcert website, and every buyer should check a supplier's certificate status before accepting a delivery.
Sustainability criteria
The RED specifies land from which agricultural biomass must not come. Excluded are areas of high biodiversity value, such as primary forests and protected areas, land with high carbon stock such as wetlands and continuously forested areas, and peatland. The reference date is January 2008.
For forest biomass, criteria cover legal harvesting, forest regeneration, protection of valuable areas and maintenance of soil productivity. For wastes and residues, land criteria usually do not apply, but you must document that the material is a waste or residue and not an intentionally produced product.
The REDcert-EU supply chain
The chain begins on a farm or where waste arises. The farmer sells feedstock to a first gathering point, which collects self-declarations and cultivation data. The feedstock then moves to traders, warehouses and processing units, and finally to the operator placing the fuel on the market.
Every operator that takes over material and passes on its sustainability status must be certified and issue a sustainability declaration with each sale. The declaration contains information on the feedstock, country of origin, quantity, certificate number and GHG emissions.
Mass balance
REDcert-EU uses mass balance. Sustainable and non-sustainable material may be physically mixed, but characteristics are accounted for separately. Within a balancing period a company cannot deliver more sustainable material than it received, taking processing into account. Details are on the REDcert mass balance page.
GHG emissions
Biofuels must reduce emissions compared with fossil fuel. For installations starting operation from 2021 the transport threshold is 65%. Biomass fuels for electricity, heating and cooling must reach 70% or 80% depending on the installation start date.
Emissions are calculated using the formula in Annex V of the directive, and the method — NUTS2 values, default values or actual calculations — is shown on the REDcert-EU certificate. Example: biodiesel with emissions of 30 gCO2eq/MJ achieves a saving of (94 − 30) / 94 = 68.1%. More in why calculate GHG emissions.
The Union Database
The European Commission runs a Union Database for liquid and gaseous transport fuels in which certified operators record transactions. It is designed to ensure transparency and reduce the risk of double counting. Database entries must match documents and the mass balance.
REDcert-EU in Poland
Polish companies can choose among several Commission-recognised schemes, including REDcert-EU, ISCC EU and KZR INiG. REDcert-EU is particularly popular in supply chains linked to the German market and is often used by oil mills, rapeseed traders and FAME producers. See REDcert, ISCC or KZR INiG for a comparison.
The sustainability declaration — what does it contain?
The sustainability declaration is the batch's "passport". It travels with the delivery or is transferred electronically. A typical REDcert-EU declaration contains:
- seller and buyer details and the seller's certificate number,
- issue date and declaration number,
- product type and the feedstock it was made from,
- feedstock country of origin,
- quantity and unit,
- confirmation that sustainability criteria are met,
- the GHG value or a statement that a default value applies,
- the installation start date where needed to assess the threshold.
Every item must be backed by records, and the buyer should check that the declaration is complete before accepting material as sustainable.
Scheme oversight
REDcert GmbH supervises certification bodies and auditors. It organises training, analyses audit reports and can carry out integrity audits. The European Commission assesses whether the scheme meets the directive's requirements and may demand changes.
This multi-level oversight protects certificate credibility. For companies it means consistent application of requirements and regular scheme updates, so it is worth following the scheme owner's announcements and updating procedures.
Common myths about REDcert-EU
"The certificate applies to the product." No. The certificate applies to the operator and its ability to manage sustainable material. Sustainability status travels through declarations.
"Having procedures is enough." No. Auditors check real transactions and records. Procedures without practice are not enough.
"Farmers need a certificate." Usually not. Farmers sign self-declarations, and verification happens during the collection point's audit.
How to get started
First establish your role in the chain and what your customers expect, then run a gap analysis and plan implementation. The stages are described in how to get REDcert certified and on the REDcert implementation page. We can help at every stage — contact us.
Frequently asked questions
Is REDcert-EU mandatory?
No. It is voluntary but recognised by the European Commission. Companies may choose another recognised scheme or, in some countries, a national scheme. In practice customers often require a specific scheme, so the choice depends on the market.
Who owns REDcert-EU?
The scheme is owned by REDcert GmbH, based in Germany and founded in 2010 by agricultural and biofuel organisations. It also runs REDcert² for non-regulated markets. Audits are carried out by independent certification bodies.
Which fuels does REDcert-EU cover?
Biofuels, bioliquids and biomass fuels, as well as RFNBOs and recycled carbon fuels, as set out in Implementing Decision (EU) 2024/3194. The recognition covers the whole supply chain, and the certification body defines the scope of each certificate.
How do I check whether a supplier has a valid certificate?
Certificates are published on the REDcert website with number, scope, validity dates and status. Check the status on the delivery date and keep a record of the check in your supplier register.
Can a REDcert-EU declaration contain actual GHG emissions?
Yes. The declaration contains an emission value determined according to the directive's methodology: an actual value, a NUTS2 value or a statement that a default value applies. Every value must be backed by calculations or supplier declarations, which the auditor checks.
Does REDcert-EU cover forest biomass?
The RED contains criteria for forest biomass, and the scheme covers biomass fuels. Confirm the detailed scope for forest biomass in the current scheme documents and with your certification body. Requirements include legal harvesting and forest management, and we can help assess scope before you apply.
Sources and reference documents
- EUR-Lex — Implementing Decision (EU) 2024/3194 recognising REDcert-EU
- EUR-Lex — Directive (EU) 2023/2413 (RED III)
- EUR-Lex — Directive (EU) 2018/2001 (RED II), Annexes V and VI
- Komisja Europejska — recognised voluntary schemes
This content is prepared by Quality Assurance Poland and is not a REDcert GmbH document. Always apply the current versions of REDcert scheme documents and legislation.