Independent consulting — we are not a certification body

REDcert solutions

GHG emission calculations under REDcert-EU

GHG calculations determine the greenhouse gas emissions attributed to a batch of biomass, biofuel or bioliquid at every stage of the supply chain. Under REDcert-EU the result decides whether a fuel meets the required GHG saving threshold and which value can be passed to the customer in the sustainability declaration.

Why calculate GHG emissions?

The RED only counts biofuels and bioliquids towards national targets if they reduce GHG emissions by the required percentage compared with fossil fuel. For new transport installations the threshold is 65%. Every operator passes on emission information, and the last operator calculates the GHG saving of the finished fuel.

A lower emission value also has commercial value. Fuel suppliers meet emission reduction obligations, so feedstock with a better GHG result can command a higher price. Robust calculations let you demonstrate and defend that value at audit.

Calculation methodology under the RED

Emissions from the production and use of a fuel are calculated using the formula in RED Annex V:

E = eec + el + ep + etd + eu − esca − eccs − eccr

ComponentMeaningWho usually provides data
eecemissions from extraction or cultivation of raw materialsfirst gathering point, farmers
elannualised emissions from land-use change, spread over 20 yearsfirst gathering point
epemissions from processingprocessing unit
etdemissions from transport and distributioneach operator arranging transport
euemissions from the fuel in usetaken as zero for CO2 from biofuels
escasavings from soil carbon accumulation via improved agricultural managementfarmer, with evidence
eccssavings from CO2 capture and geological storageprocessing unit
eccrsavings from CO2 capture and replacementprocessing unit

The result is expressed in grams of CO2 equivalent per megajoule of fuel (gCO2eq/MJ). GHG savings are calculated as (EF − EB) / EF, where EF is the fossil fuel comparator and EB the biofuel's emissions. For transport fuels EF is 94 gCO2eq/MJ.

A worked example

Suppose total emissions for rapeseed biodiesel are 30 gCO2eq/MJ. The saving is (94 − 30) / 94 = 68.1%, so the fuel meets the 65% threshold for installations starting operation from 2021. At 35 gCO2eq/MJ the saving would drop to 62.8% and the fuel would fail the threshold for new installations.

A few grams decide whether a fuel qualifies, so every stage of the chain should know its contribution and options for reducing it.

Default values, NUTS2 or actual calculations?

There are three ways to determine emissions, and the method used is shown on the REDcert-EU certificate.

  • Default values from RED Annex V. Easy to use but usually less favourable; applicable when the directive's conditions are met.
  • NUTS2 values for cultivation emissions. Member States report typical regional cultivation emissions to the Commission, and a collection point can use them for feedstock from that region.
  • Actual calculations based on farm or plant data. More work, but often the best result.

Methods can be combined, for example NUTS2 for cultivation and actual values for processing. We help choose the most favourable and safest option.

RED GHG emission formula — eec, el, ep, etd, eu and savings components

Calculations for each stage of the chain

Cultivation (eec). Emissions from mineral and organic fertilisers, plant protection products, machinery fuel and soil nitrous oxide, based on farmers' data and expressed per tonne of dry crop.

Transport (etd). Every transport leg of feedstock and products — road, rail, waterway — considering distance, vehicle type, load and empty return trips.

Processing (ep). Electricity and heat use, fuels, chemicals and auxiliaries. In multi-product plants, emissions are split by energy allocation based on lower heating value.

Biogas and biomethane. Digestate storage emissions, tank covers and any manure credit matter greatly and can change the result significantly.

Verification and documentation

The auditor checks input data, formulas and emission factors. Calculations must be reproducible, and every number needs a source: an invoice, meter reading, production report or published factor.

Our calculation report covers the method, system boundaries, input data, factors and result. It simplifies the audit and forms the basis for future updates. On request we also verify calculations prepared earlier by your company or another consultant.

One-off calculation or calculator?

A one-off calculation is enough for stable processes. If data changes with every batch or season, a GHG calculator is better: you enter data and receive the result with a report. A ready-made tool is also available in the shop.

Cultivation emissions at a collection point

A first gathering point has three options: the directive's default value where conditions are met, the NUTS2 value for the feedstock's region of origin, or actual emissions from farm data.

Actual calculations require farmers' data on fertilisation, plant protection, fuel use and yield for a specific season and field or group of fields. The collection point needs a procedure for gathering and checking this data, and atypical values must be explained.

Emissions at biogas and biomethane plants

At biogas plants the GHG result depends heavily on substrates and digestate storage. Slurry and manure can deliver significant savings by avoiding methane emissions from conventional manure storage, while open digestate tanks increase emissions.

For biomethane, upgrading emissions, including methane slip, and grid injection must be added, together with electricity and heat use. We help collect data and prepare calculations for the whole installation.

What the calculation report contains

  • description of the installation, products and system boundaries,
  • calculation method and reference to the RED,
  • input data for the reference period with sources,
  • emission factors with source and version,
  • intermediate calculations and allocation,
  • result in gCO2eq/MJ and GHG saving,
  • sensitivity analysis for key parameters,
  • recommendations for reducing emissions.

Frequently asked questions

When should we calculate actual values instead of using defaults?

When your process is energy-efficient or feedstock comes from a low-emission region. Default values are deliberately conservative, so actual calculations often give a better result. They do require complete data and verification. We run a quick cost-benefit check before you decide.

What are NUTS2 values?

Typical cultivation emission values for NUTS2 statistical regions, prepared by Member States and submitted to the European Commission. A collection point can apply the value for the region where the feedstock was grown. This is simpler than collecting data from every farm.

What data is needed to calculate processing emissions?

Quantities of feedstock processed and products obtained, electricity, heat and fuel use, and chemical consumption. You also need data on the energy source, such as a boiler or CHP. Data should cover a representative period, usually a year, with documented sources.

How are emissions split between oil and meal?

The RED requires energy allocation based on lower heating value. Emissions are divided in proportion to the energy content of oil and meal. Residues and wastes carry no upstream emissions. Allocation rules must be described in your GHG procedure.

Must transport be calculated for every delivery?

Not necessarily. Representative routes and vehicles can be used if documented and conservative. With large distance differences, calculate per delivery group. A calculator can automate this, and the method is described in your procedure.

Are GHG calculations verified by the auditor?

Yes. The auditor checks input data, method and result and may request additional evidence. Actual calculations need particular care, as errors can lead to a ban on using actual values. That is why we prepare a full calculation report.

How much does a GHG calculation cost?

It depends on the number of stages and products and on data quality. A transport calculation for a trader is simple; a multi-product processing plant takes more work. We quote after reviewing your data.

How often should calculations be updated?

At least annually and after any significant change in process, energy source or feedstock, as well as after changes to emission factors in scheme documents or legislation. A calculator makes ongoing updates easier. Record the calculation date in the report.

Sources and reference documents

This content is prepared by Quality Assurance Poland and is not a REDcert GmbH document. Always apply the current versions of REDcert scheme documents and legislation.

Enquire about this service

Briefly describe your business and certification goal, and we will propose a scope, timeline and price.

Preferred contact

Next step

Clarify REDcert requirements and build audit-ready evidence

Start with a short description of your business, feedstocks and certification goal.

Request a proposal