Independent consulting — we are not a certification body

Knowledge base

Why calculate GHG emissions under REDcert?

GHG emissions are calculated to show that a biofuel or bioliquid reduces emissions by the required percentage compared with fossil fuel, and to pass a reliable emission value for each batch to the customer. Lower emissions increase the commercial value of feedstock and fuel, because they help fuel suppliers meet their reduction obligations.

RED GHG emission formula and comparison with the fossil fuel comparator

How GHG savings are calculated

GHG savings are the difference between fossil fuel and biofuel emissions, expressed as a percentage of fossil fuel emissions:

Saving = (EF − EB) / EF

For transport fuels EF is 94 gCO2eq/MJ. EB is the sum of emissions along the chain — cultivation, land-use change, processing, transport and use — minus savings. The detailed formula is E = eec + el + ep + etd + eu − esca − eccs − eccr.

A worked example

Consider rapeseed biodiesel with the following values:

ComponentValue (gCO2eq/MJ)
Cultivation (eec)18.0
Processing (ep)9.5
Transport (etd)2.5
Total (E)30.0

The saving is (94 − 30) / 94 = 68.1%, which meets the 65% threshold. If the collection point uses a NUTS2 value 3 gCO2eq/MJ lower, the total falls to 27.0 and the saving rises to 71.3% — a difference with real commercial value.

These figures are illustrative. Actual values depend on region, technology and company data.

Three ways to determine emissions

  • Default values from Annex V of the directive. Simple but deliberately conservative, applicable when the directive's conditions are met.
  • NUTS2 values for cultivation, prepared by Member States for statistical regions. A good balance between simplicity and accuracy.
  • Actual calculations based on company data. The most work but often the most favourable, requiring careful documentation and verification.

The method used is shown on the REDcert-EU certificate and affects the audit scope.

Who in the chain calculates emissions?

Each stage is responsible for its share. The collection point determines cultivation emissions, operators arranging transport add transport, and the processing unit calculates processing emissions and allocates them between products. The last operator sums the components and calculates the saving.

An error at one stage carries through to the next, so declarations must contain consistent values and companies should check supplier data.

Benefits of robust calculations

  1. Legal compliance. The fuel can count towards national targets.
  2. Higher prices. Lower-emission feedstock is more attractive to buyers.
  3. Stronger negotiating position. You know your result and can defend it.
  4. Investment decisions. Calculations show where reductions pay off, for example a new energy source.
  5. ESG reporting. GHG data is needed for customers' climate reports.

Where errors most often occur

  • no source data for actual calculations,
  • outdated emission factors,
  • empty return trips left out of transport,
  • incorrect allocation between main products and co-products,
  • assigning a batch a better value than its purchase value,
  • not updating calculations after process changes.

Cultivation — the largest component

In many crop-based biofuel chains cultivation is the largest source of emissions, driven mainly by nitrogen fertilisers: emissions from their production and nitrous oxide from soil. Machinery fuel and plant protection products contribute less.

Accurate cultivation data is therefore crucial. A farmer using precision fertilisation with high yields may have emissions well below the default value, and a collection point that gathers such data can pass on a better value.

Processing — the greatest improvement potential

At a processing plant emissions depend mostly on the energy source. A plant powered by coal-based energy has higher emissions than one with gas or biomass CHP, and switching energy source can cut processing emissions by several grams per megajoule.

Yield matters too. Higher yield means less feedstock per unit of product and therefore lower cultivation emissions attributed to it, so technology and process optimisation affect the GHG result of the whole chain.

GHG data and corporate climate reporting

GHG data from biomass chains is increasingly used beyond the RED. Large companies report supply chain emissions in sustainability reports and ask suppliers about product carbon footprints.

Calculations under the RED methodology are a good starting point but are not always directly comparable with other methods such as ISO 14067, because system boundaries and allocation rules differ. Always state which method was used.

How the GHG value affects price

In many Member States fuel supplier obligations are linked to emission reductions. A lower-emission fuel lets suppliers meet obligations with less bio-component, so they will pay more for bio-components with better GHG results. This premium passes down the chain to processors and collection points.

A company that knows and can document its emissions negotiates from a stronger position, while one using only default values may be giving away part of its product's value.

How to get started

Start with a data inventory: energy, fuel and chemical use, transport routes and cultivation data. Compare the result with default values; if the difference is significant, actual calculations are worth implementing. We help through GHG calculations and build GHG calculators for daily work. A ready-made tool is in the shop.

Frequently asked questions

Does every company in the chain have to calculate emissions?

Every company must pass on emission information, but not all calculate it themselves. A trader without storage usually passes on supplier values and may add transport. Processing units calculate processing emissions and collection points determine cultivation emissions.

What is the fossil fuel comparator?

The emissions of the fossil fuel with which the biofuel is compared. For transport fuels it is 94 gCO2eq/MJ; other values set out in the directive apply to electricity and heat. The comparator is fixed in calculations.

Do actual calculations always pay off?

Not always. They require time, data and verification and pay off when they give a clearly better result than default or NUTS2 values. Run a quick comparison before deciding.

How often should calculations be updated?

At least annually and after any significant change in process, energy or feedstock, as well as after changes in legislation or factors. Record the calculation date in the report, as auditors check data currency.

Do transport emissions matter?

They are usually a smaller share but can matter on long routes, such as shipping from other continents or long road haulage. Calculate them carefully, including empty returns; a calculator makes this easier.

What does esca mean?

Emission savings from soil carbon accumulation through improved agricultural management. It can improve the result but requires solid evidence such as soil analyses, and the conditions for using it are strictly defined. Seek advice before applying it.

Sources and reference documents

This content is prepared by Quality Assurance Poland and is not a REDcert GmbH document. Always apply the current versions of REDcert scheme documents and legislation.

Next step

Clarify REDcert requirements and build audit-ready evidence

Start with a short description of your business, feedstocks and certification goal.

Request a proposal